重慶川儀Royce Mode195A傳感器用于測量m留L級水中溶解氧。主要用于野外連續DO檢測和控制。，探頭外形小巧，結構堅固，具有抗腐蝕性，是為苛刻環境要求而設計。用于廢水處理、水體保護、農業和海洋學工業。Royce mode195ADissolved Oxygen Sensor

Chongqing Chuanyi Royce mode195Asensor can measure dissolved oxygen concentration in solutions to the level of mg/L and can be used to detect and control the outdoor DO continuously. Its probe is small in size, firm in structure and of great anti-corrosion, all these are special designed to meet the requirement of harsh service conditions. Royce mode195Ais mainly used in wastewater procession, water protection, agriculture and oceanology.

重慶川儀溶解氧Royce ModeI95A傳感器的主要特點如下：

堅固抗腐蝕結構

Pt陰極、鉛陽極;

自動溫度補償;

在野外易于安裝:

無需特殊工具;

更換膜片和電解液方便;

電極經久耐用，配有一盒膜片和一瓶電解液;

校驗簡單，在空氣中或溶液中均可完成。

Main Technical Features

.Firm structure of great anti-corrosion feature

.Pt cathode and Pb anode

.Automatic temperature compensation

.Easy outdoor installation

.No dependence on special tools

.Easy to replace membrane and electrolyte

.Electrode has a long life time, another box of membrane and a bottle of electrolyte is packed before shipment.

.Simple calibration which can be finished in air or solutions

使用維護

.使用時，必須安裝膜片和電解液;

.裝配電極時需要在電極前端和尾部的0形圈涂抹脂潤滑油，以確保密封良好;

.棕色圓盤紙是使用在膜片制造上，膜片裝配時應去掉;

.避免觸摸敏感區域(中央)，不要碰傷、劃破膜片，不要用硅酸脂潤滑油污染膜片;

.電極的鉑頂端是安裝*敏感的區域，不要重?fù)簟⒉羵駝t會損傷其表面，不允許鉑與金或銀(珠寶)接觸;

.電極填充液添加至筒上刻度線處即可;

.電極體插入筒中，要很輕旋轉式的推到前端0形圈以上1/8一處就可以了;

.裝好后要檢查膜片，確保膜片光滑和自由起皺.否則重裝。

.Application and Maintenance

.Install membrane and electrolyte while use

.Lubricate the front end of electrode and the O-ring at the rear end when assembling electrode to ensure the well sealing

.Remove the circle brown paper in the membrane for the paper is used for membrane manufacture.

.Do not touch the sensitive area (center), do not bruise or scratch the membrane, or contaminate the membrane with Silicone ester lubricating oil

.The Pt end of the electrode is the most sensitive part, do not strike or scratch this part, or the surface w川be damaged. Avoid the contact of Pt with gold and silver (jewelry)

.Optimum result shall reach the scale mark

.When insert the electrode into the barrel, slightly rotate the electrode to the 1/8"  point above the O-ring

.Check the membrane after installation. Membrane shall be smooth OlherwisP reinsta

咨詢電話：023-68099522